Hotline 1900 4656 · Hanoi 024 5678 9668 · sales@tamnuocnhapkhau.com Opening hours: Mon – Sat, 08:00 – 17:30
Inmax Asia
Get dealer pricing

UV water flosser M149Art

UV water flosser M149Art
Model M149Art · In stock

UV water flosser M149Art

A UV light shines inside the water tank and a fifth Custom mode is added; pressure starts at 30 PSI, gentler than other M149 models.

PriceContactDealer pricing by volume tier
Compare with other models Call 1900 4656

Specifications from the official Inmax Dental catalogue (page 8).

Follow us
Share this model

Highlights M149Art

Compiled from the official Inmax Dental catalogue and banners.

Specification sheet

Figures from the official Inmax Dental catalogue, for dealers to advise customers and check goods on receipt.

Product line
Water flossersUV water flosser — best channel: Marketplaces · pharmacies · dental clinics.
Tank capacity
300ml ≈ 45 seconds of continuous rinsingEnough for one person in a single session, handier and lighter than a countertop unit.
Pressure
30 – 120 PSI5 levels from gentle to strong — new users start at the lowest setting so the gums adapt, then move up.
Power
1500 mAhA 1500 mAh battery — partners can deliver without a warning about constant recharging.
Waterproof rating
IPX7IPX7: survives immersion, so customers can use it in the shower — this alone cuts water-ingress complaints sharply.
Operating modes
Pulse/Soft/Normal/Strong/Custom(UV lamp)
Rated voltage
3.7V
Product size
228*70*84.6MM
Box size
236*74*87MM
Net weight
345g
Gross weight
420g with packaging
Carton
30PCS/CTN14KG/CTN · 47*47*26CM — figures partners need to budget freight before ordering a batch.

Product sheet M149Art

Banner issued by Inmax — partners can download it for marketplaces and social media.

Banner UV water flosser M149Art

Click the image to download the original.

Side by side with models of the same type

So partners pick the right model for their channel before ordering the first batch.

Specification comparison of Inmax Asia models
ModelCapacityPressureLevelsPowerCarton
M139ArtWater flosser M139Art 300ml ≈ 45 seconds 40 – 130 PSI 9 1500 mAh 30PCS/CTN · 12KG/CTN
M149Water flosser M149 300ml ≈ 45 seconds 40 – 130 PSI — 1500 mAh 30PCS/CTN · 14KG/CTN
M149ArtUV water flosser M149Art 300ml ≈ 45 seconds 30 – 120 PSI 5 1500 mAh 30PCS/CTN · 14KG/CTN
M149PlusUV water flosser M149Plus 300ml ≈ 45 seconds 40 – 130 PSI 5 1500 mAh 20PCS/CTN · 14KG/CTN
M149ProWater flosser M149Pro 300ml ≈ 45 seconds 40 – 130 PSI 4 1500 mAh 20PCS/CTN · 14KG/CTN

Swipe sideways to see the whole table.

See the full comparison of 17 models

Questions dealers ask most

The four most common after-sales situations — partners can answer customers themselves without calling us.

Can saline or mouthwash go in the tank?
Yes, but dilute it and rinse the tank with clean water after every session. Leaving the solution in the tank causes scaling and pump corrosion — the most common warranty cause.
What if a customer says the pressure is weak?
Usually a blocked nozzle or a tank that is not seated properly. Have the customer soak the nozzle in diluted vinegar for 15 minutes and refit it. Only escalate to the Inmax hotline if it is still weak.
How does the warranty work — do partners need to hold spare parts?
A 24-month warranty; customers call the Inmax hotline 1900 4656 directly. Partners hold no spare parts, do no technical work and field no complaints on the manufacturer’s behalf.
Does a small trial order still get dealer pricing?
Yes. A single carton (30 units) still gets tiered dealer pricing, with no volume commitment and no deposit on the first order.

Model related